home *** CD-ROM | disk | FTP | other *** search
- Path: birdland.rhein-neckar.de!usenet
- From: Massimo.Mancini@rhein-neckar.de (Massimo Mancini)
- Newsgroups: comp.sys.amiga.hardware
- Subject: CyberStorm Jumper Settings
- Date: 13 Jan 1996 19:30:11 GMT
- Organization: Lullaby of Birdland
- Message-ID: <1029.6586T836T947@rhein-neckar.de>
- NNTP-Posting-Host: credev.rhein-neckar.de
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- Howdy!
-
- I was wondering what the jumpers JPA and MB-Burst do if turned on ?
- These jumpers aren`t described further in my manual, but as JPA is for
- RAM Speed and MB-Burst is for "enables/disables burst access to the
- mainboard", it sounds very interesting.
-
- In fact, I`ve set the JPA to the fast-mode as I`m using 60ns RAMs, but I`m
- not sure about the MB-BURST...
-
- - What does it exactly, and what can go wrong if I enable the burstmode ?
-
- - What would be the benefit if turned on anyway ?
-
- - Is it OK to set the higher speed with JPA, together with 70ns RAMs ?
- The manual doesn`t explain much of these additional "optimisations" and
- only speaks about "70ns or less" for the RAM speed.
-
- I`d be very thankful for any useful answer...
-
- --
- _/\_____/\_/\ ____/\ ___
- \ \ \ X /\ X / A4ooo/o6o * ISDN
- / //\ \ \ \ \ 34MB * 1GB * CDR
- / / / / / X \/ X \ CV64 * CyberSCSI
- / /_/_/__/\ \_/ \ \_/ \ \A12oo/o3o * CD32
- \_/~~~~~~~~~\_/~~~\_/~~~~\_/~~~~~~~~~~~~~~~~
- EMail:Massimo.Mancini@rhein-neckar.de
-
-